E-paper photo frame

New project: e-paper photo frame
Why: Standard digital photo frames use a small screen, just like a monitor. It looks nice, updates in a blink, and the pictures displayed are very visible. What annoys me is that at night the screen emits lots of light, and it is just too present. It does not look good, and it annoys me enough to turn the device off, and avoid turning it back on again.
The solution: A photo frame with an e-paper display does not emit light. In the dark you cannot see it, but this is exactly the same as with a normal photo you put on the wall.
Requirements: I want a simple frame. Just a couple of photos, each day a different one.

  • No cloud,
  • no AI,
  • no integrated voice assistant,
  • no monthly subscription,
  • no required registration,
  • no online accounts,
  • no personalised advertisements,
  • no harvesting of my data,
  • no sharing my data with others.

I want nothing fancy, just an SD card I put my photos on, and a source of power to plug it in.

Proof of concept. Connect the raspberry to the epaper screen, and see if I can print one of my photos to it. It should work, but you never know.

Steps required for this phase:

  • Get a raspberry pi. I wanted the smallest, most basic version, the Raspberry Pi zero 2 WH, but this version was sold out at various places, so I got the Raspberry Pi 3 Model A+ instead. This version is a bit bigger but for the proof of concept that doesn’t matter
  • Get a micro sd card (big enough to contain the lite OS, and have some room for the images I want to display)
    • Make it bootable with the raspberry OS
    • First step is connect it to a monitor and a keyboard, and see if the Raspberry starts, and if I can connect to it
  • Get the epaper screen
    • Connect the epaper screen to the raspberry
    • Install drivers
    • Sent a test image to the screen
  • Turn off the raspberry, and check if the image remains on the screen

If it works it works, and we can go and make it work even better.

Robot Alex I and Alex II

In addition to his normal toys Alex also has two robots. These robots are called Alex I and Alex II and can only be played with together with his dad.

Robot Alex!Robot Alex

The first robot is a balancing robot (which I found on Kickstarter). It drives around on two wheels trying hard to not fall down. Even a little poke from Alex does not bother the robot and it will keep its balance.

The robot can be programmed by using a simple programming language (blocks), and then sending the program to the robot using its USB cable, but this is something we’ll maybe try in the future.

Robot Alex 2!Robot Alex II

The second robot is a bit simpler and just drives around. It does have an entire computer on it’s back, which can be controlled via wifi and my phone.

This robot as got some software set up to move about, and much more features can be added as phyton programs.

Alex has these robots because I think is it very benificial for him to get in touch as early as possible with something that will be everywhere in his future. Alex his current robots remind me of the computers I had when I was young. Slow, huge and with a black and white screen. After taking a long time to boot all you would get was a prompt, and that was it. Internet didn’t exist and was still a thing of the future.

Alex’ robots are far more advanced that my old computers and cost a fraction. They will advance extremly fast for sure and in a few decades Alex will look back at these things as I look back at my old PC’s.